Finding Similarities Between Devices and Life

How You Can Use Plasma Cutters

You can cut metals using a plasma cutter that utilizes a plasma torch. You have to create a plasma in order for a plasma cutter to work. Having a liquid and gas composition, you can create a plasma which is superheated.

Plasma cutters often use compressed inert gasses and electricity in order to make a plasma. Using the metal that is being cut, a plasma cutter creates an electric circuit in order to cut the metal. In order for you to make an electric circuit, you have to touch the end of the nozzle with the metal. By using the negative electrode, the electrical sparks and the fast flowing inert gasses will meet. Plasma is transformed once the gases reach a temperature of more than 15,000 degrees Celsius. The plasma will then go out of the nozzle which will directly hit the metal that you are cutting. The very reason for the fast exit of plasma on the tip of the nozzle is due to its tiny exit. The reason for the accuracy of the plasma just like a laser is because of the speed, temperature, and it is focus.

Just as long as everything is set up properly, the cut will be almost like perfect. As long as the materials conduct electricity, the plasma cutter can cut it. A plasma cutter can work with a variety of materials including copper, stainless steel, aluminum and etc.

The High-Frequency Contact is one type of a plasma cutter. It is considered as a low budget gear as it is not compatible with CNC plasma cutting operations. In order for it to create a plasma, it uses high frequency and high voltage spark. In order for it to create a plasma, the tip f the torch should touch the metal.

Another type of plasma cutter is the pilot arc and it produces plasma in two cycles. During the World War II, the first plasma cutters were born. In order to cut metals, it uses high-voltage and high-frequency circuits. If the operator is not careful, there is a high risk of electrocution. It is also very hard to maintain and repair the first versions.

A plasma cutter can cut metals regardless of its thickness. the serer cut is dependent on the size of the machine. The higher the sever cut, the thicker the metal a plasma cutter can cut. A CNC plasma c cut will do a better work if the metal to be cut is thick. But the thicker the sever cut, the messier the cut will be. The edges must be cleaned once the cut is done. The cuts are more precised in a CNC plasma cutter because it is computer controlled. When you have projects that are repetitive you better have a CNC plasma cutter.